Manual 273521lastevil

  1. Manual 273521 Last Evil Knievel
  2. Manual 273521 Last Evil Remaster

If you have a pneumatic (air) spa controller with HEATER but would like the convenience of being able to not only control the temperature from a topside control unit, but to also see an LED display of the water temperature, this standard topside command center is for you. This is a must if you have limited access to your spa equipment or if you would prefer not getting out of the hot tub every time you want to adjust the temperature. This topside WILL NOT work with the Heat Recovery Control unit from TecMark.

Ask us about the Briggs and Stratton 273521 Intek V-Twin Repair Manual. Please no repair questions. Your Q&A may be posted to Jackssmallengines.com to help other shoppers, like you, with their purchasing decisions. Find Sealed Power 273AP Sealed Power Cast Pistons and get Free Shipping on Orders Over $99 at Summit Racing! For budget or stock-style rebuilds, it's hard to beat the value of Sealed Power cast pistons. They're made from high-quality aluminum alloys and feature a carefully controlled casting, heat-treating, and CNC-machining process. And, because they're designed and manufactured to exceed OEM. Briggs & Stratton 273521 parts lookup and Briggs & Stratton diagrams with parts lists of Genuine Briggs & Stratton Repair Manual, Intek V2 OHV parts PartsTree.com. View and Download Enercell 273-355 273-355 installation manual online. 9VDC 800mA AC-to-DC Power Adapter. 273-355 273-355 adapter pdf manual download. Also for: 273-355.

Manual 273521lastevilManual

THE FOLLOWING COMMAND CENTERS WITH 6FT and 10FT CORDS ARE CURRENTLY OUT OF STOCK: 30-200-1017, 30-200-2005, 30-200-2011, 30-200-2019, 30-200-2007, 30-200-2013

Last

SpaGuts P/N:

  • 30-200-1016, 110V, 2-Button, 6ft Cord with 6ft Sensor
  • 30-100-1005, 110V, 3-Button, 6ft Cord with 6ft Sensor
  • 30-200-2010, 110V, 4-Button, 6ft Cord with 6ft Sensor

  • 30-200-1017, 220V, 2-Button, 6ft Cord with 6ft Sensor < OUT OF STOCK
  • 30-200-2005, 220V, 3-Button, 6ft Cord with 6ft Sensor < OUT OF STOCK
  • 30-200-2011, 220V, 4-Button, 6ft Cord with 6ft Sensor < OUT OF STOCK

  • 30-200-2018, 110V, 2-Button, 10ft Cord with 6ft Sensor
  • 30-200-2006, 110V, 3-Button, 10ft Cord with 6ft Sensor
  • 30-200-2012, 110V, 4-Button, 10ft Cord with 6ft Sensor

  • 30-200-2019, 220V, 2-Button, 10ft Cord with 6ft Sensor < OUT OF STOCK
  • 30-200-2007, 220V, 3-Button, 10ft Cord with 6ft Sensor < OUT OF STOCK
  • 30-200-2013, 220V, 4-Button, 10ft Cord with 6ft Sensor < OUT OF STOCK

  • 30-200-2020, 110V, 2-Button, 25ft Cord with 25ft Sensor
  • 30-200-2008, 110V, 3-Button, 25ft Cord with 25ft Sensor
  • 30-200-2014, 110V, 4-Button, 25ft Cord with 25ft Sensor

  • 30-200-2021, 220V, 2-Button, 25ft Cord with 25ft Sensor
  • 30-200-2009, 220V, 3-Button, 25ft Cord with 25ft Sensor
  • 30-200-2015, 220V, 4-Button, 25ft Cord with 25ft Sensor

Standard Dimensions (Approx): 6.50 inches L x 3.25 inches W x 4.50 inch D

Your choice of 2, 3 or 4 buttons. Manufactured by TecMark. Comes with a 2-year manufacturer's warranty.

Keep in mind that most Original Command Centers are rated 110 or 120 volts. Verify off the original topside label or take voltage measurement off the 6-pin receptacle from the controller box for voltage rating. Newer model Topside Command Centers will only have 5-pin plugs as shown in photo, which will work fine on a 6-pin receptacle. The 5-pin plug style is UL approved for safety standards.

Need a replacment thermowell for your topside command center temperature sensor probe?

NOTE 1: This topside command center only works with pneumatic (air) type controllers that is topside ready with a 6-pin receptacle installed. This topside WILL NOT work with the Heat Recovery Control unit from TecMark.

Manual 273521 Last Evil Knievel

Manual 273521lastevil

NOTE 2: This topside command center has an LED display that also needs constant power to the display at all times in order for the thermostat to work. If the LED display version is replacing an old topside command center that has no LED display, customer MUST be willing to re-wire the main controller box to provide constant power to the new topside with LED display.

NOTE 3: A few controllers out there are pre-wired for a topside command center with no display. Customer MUST be willing to re-wire the main controller box to provide constant power to the new topside with LED display. Normally this is determined by having to turn on the blower circuit in order to get the LED display to light up.

Manual 273521 Last Evil Remaster

NOTE 4: Topside Command Centers with 25-foot cord and sensor may have a lead time of between 3 to 6 weeks before shipping if they are not in stock. These are limited to stock due to low sales volume.

Replacement option for the following topside panels: CC2-120-06-1-00 or CC2-120-06-X-00 (see Note 2 and 3), CC2-240-06-1-00 or CC2-240-06-X-00 (see Note 2 and 3), 3-10-0040 or CC2-120-10-1-00 or CC2-120-10-X-00 (see Note 2 and 3), CC2-240-10-1-00 or CC2-240-10-X-00 (see Note 2 and 3), CC2D-120-06-1-00, CC2D-120-06-X-00, CC2D-240-06-1-00, CC2D-240-06-X-00, 3-10-0043, CC2D-120-10-1-00, CC2D-120-10-X-00, CC2D-240-10-1-00, CC2D-240-10-X-00, CC2-120-25-1-00 or CC2-120-25-X-00 (see Note 2 and 3), CC2-240-25-1-00 or CC2-240-25-X-00 (see Note 2 and 3), CC2D-120-25-1-00, CC2D-120-25-X-00, CC2D-240-25-1-00, CC2D-240-25-X-00, CC3-120-06-1-00 or CC3-120-06-X-00 (see Note 2 and 3), CC3-240-06-1-00 or CC3-240-06-X-00 (see Note 2 and 3), 3-10-0041 or CC3-120-10-1-00 or CC3-120-10-X-00 (see Note 2 and 3), CC3-240-10-1-00 or CC3-240-10-X-00 (see Note 2 and 3), CC3D-120-06-1-00, CC3D-120-06-X-00, CC3D-240-06-1-00, CC3D-240-06-X-00, 3-10-0044, CC3D-120-10-1-00, CC3D-120-10-X-00, CC3D-240-10-1-00, CC3D-240-10-X-00, CC3-120-25-1-00 or CC3-120-25-X-00 (see Note 2 and 3), CC3-240-25-1-00 or CC3-240-25-X-00 (see Note 2 and 3), CC3D-120-25-1-00, CC3D-120-25-X-00, CC3D-240-25-1-00, CC3D-240-25-X-00, CC4-120-06-1-00 or CC4-120-06-X-00 (see Note 2 and 3), CC4-240-06-1-00 or CC4-240-06-X-00 (see Note 2 and 3), 3-10-0042 or CC4-120-10-1-00 or CC4-120-10-X-00 (see Note 2 and 3), CC4-240-10-1-00 or CC4-240-10-X-00 (see Note 2 and 3), CC4D-120-06-1-00, CC4D-120-06-X-00, CC4D-120-06-B-00, CC4D-240-06-1-00, CC4D-240-06-X-00, 3-10-0045, CC4D-120-10-1-00 or CC4D-120-10-X-00, CC4D-240-10-1-00, CC4D-240-10-X-00, CC4-120-25-1-00 or CC4-120-25-X-00 (see Note 2 and 3), CC4-240-25-1-00 or CC4-240-25-X-00 (see Note 2 and 3), CC4D-120-25-1-00, CC4D-120-25-X-00, CC4D-240-25-1-00, CC4D-240-25-X-00, CC4D-120-06B-00, 34-0039A-S, 34-0039D-S, 34-0037A-S, 34-0037D-S, CC4D-240-10I-00